Ver-mac is a leading manufacturer of electronic traffic control and work-zone safety equipment based in Quebec City, Canada. Ver-mac have a strong presence in the United States market, along with international coverage throughout Australasia and into Europe.

Mooven's Smart VMS offering is integrated with Ver-mac, enabling you to setup and control Ver-mac portable signs from within Mooven.

Step-by-step instructions are provided below for connecting to and setting up Ver-mac PCMS boards.

Before you can connect to your Ver-mac board, Mooven needs to be granted access to your boards.

To do this:

Once access has been shared, you will be able to connect to your boards within Mooven.

Within Mooven, navigate to the monitoring site that will be used to control your PCMS sign. From here, select 'SmartVMS' in the top navigation, then select 'add Smart VMS'.

Once you have given your board a name that will be used to identify the PCMS board, select Ver-mac from the 'Select Board Manufacturer' drop-down menu.

To connect to a Ver-mac board, you will need to find Ver-mac's unique ID for the board. The easiest way to find this is to:

Add the board ID and select 'Test Connection'

.

If the board has connected successfully, you will see this message.

The most likely failure message will be an invalid user name and password.

The two most likely error messages are either an access error or an issue with the specific board.

If you experience an access error, please verify that the board has been successfully shared with Mooven. If you continue to experience issues, please contact our support team.

If there is an issue with the board, the error message will warn you of the issues but let you complete the configuration and setup.

Once you have successfully connected to the Ver-mac PCMS you can continue to setting up SmartVMS messaging

This article provides a guide to setting up messaging: Smart VMS Guide